Oven and wall-oven repair, calibrated to the temperature you set
An oven that won't heat, heats unevenly, or runs hot or cold is rarely a mystery to a factory-trained technician — it's a bake element, an igniter, an oven sensor or a control board, and each leaves a distinct signature. We diagnose the real fault and repair it to manufacturer spec, then verify the oven holds the temperature it displays, so your baking is predictable again.
The oven problems we fix most
On electric ovens, no-heat and uneven baking usually come down to a failed bake or broil element, or an oven sensor that has drifted and is feeding the control board the wrong temperature. On gas ovens, the classic fault is a weak igniter that glows but never gets hot enough to open the gas valve, so the oven never lights. Control-board and touch-panel failures, temperature that's off by 25–50 degrees, and door or self-clean lock faults round out the calls we see.
- Won't heat, or bakes unevenly
- Bake or broil element not working
- Gas igniter glows but no flame
- Temperature runs hot or cold
- Control-board, display, or self-clean lock faults
Ranges, wall ovens and pro-style units, every brand
We repair Samsung, LG, Whirlpool, GE, Maytag, KitchenAid, Frigidaire, Bosch and more — freestanding ranges, slide-ins, double wall ovens and pro-style units. GE and Whirlpool bake elements and igniters are frequent service items; smart ranges from Samsung and LG add sensor and control-board faults that reward board-level diagnosis. We fit genuine OEM parts so the oven stays safe and accurate.
Repair or replace? A straight answer
Ovens and ranges are usually very worth repairing — elements, igniters and sensors are inexpensive, and even control boards typically cost far less than a comparable new range, especially for double wall ovens and pro-style units. We'll give you the honest math before any work begins.
What to expect when we come out
We diagnose the fault, give you a written quote first, and repair with genuine OEM elements, igniters, sensors and boards. Before we leave we confirm the oven reaches and holds the set temperature on a meter. Every oven repair carries our 6-month parts-and-labor warranty.
Common problems we fix
- Oven will not heat
- Bakes unevenly / wrong temperature
- Will not reach set temp
- Self-clean error / door locked
- Error codes on display
- Broil element not working
Frequently asked questions
My oven heats but bakes unevenly. What causes that?
The most common cause is a temperature sensor that has drifted out of range, telling the board the cavity is hotter or cooler than it is. Replacing or recalibrating it usually restores even baking. A failing element or convection fan can also be responsible.
My oven door locked during self-clean and will not open. Help?
This is common. Self-clean heat frequently trips a thermal fuse or stalls the door-lock motor. We diagnose whether it is the fuse, the lock assembly or the board and restore normal operation.
Do you repair gas ranges as well as electric ovens?
Yes — we service both. Gas oven work (igniters, safety valves, flame sensors) is performed by trained technicians because it involves combustion safety.
My gas oven won't light but the igniter glows — why?
That's the classic weak-igniter fault: it glows but no longer draws enough current to open the gas safety valve, so the oven never lights. Replacing the igniter with a genuine part fixes it.
My oven temperature seems off — can you fix that?
Yes. Temperature that runs hot or cold is usually a drifting oven sensor feeding the board the wrong reading, or a calibration issue. We test the sensor, replace it if needed, and verify the oven holds temperature on a meter.